Ifekthri ye-API ye-geothermal well tricone drilling bits esitokweni

Imboni ye-API yamabhithi okumba we-geothermal well trione esitokweni Isithombe esifakiwe

I gama le-brand:	EMpumalanga Ekude
Isitifiketi:	I-API ne-ISO
Inombolo Yemodeli:	IADC237
Inani elincane le-oda:	1 isiqephu
Imininingwane Yephakheji:	Ibhokisi lePlywood
Isikhathi sokuthumela:	5-8 izinsuku zokusebenza
Inzuzo:	Ukusebenza Okusheshayo
Isikhathi Sewaranti:	Iminyaka engu-3-5
Isicelo:	Umthombo Wamafutha, Igesi Yemvelo, I-Geothermy, Ukumba Umthombo Wamanzi

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Ividiyo Ehlobene

Ikhathalogi

Incazelo Yomkhiqizo

I-Wholesale API uwoyela i-tricone rock drill bits esitokweni ngentengo ehlisiwe evela embonini yase-China
I-Far Eastern Drilling inganikeza izingcezu ze-TCI trione namazinyo ensimbi ama-tricone bits ngobukhulu obuhlukahlukene.kusuka ku-3 "kuya ku-26") kanyeIningi lamakhodi e-IADC.
I-IADC: I-237 ijenali yezinyo lensimbi evalwe ibhithi elinesikali esinokuvikelwa kwegeji yokwakheka okuqinile okuphakathi nendawo okunamandla acindezelayo aphezulu.Amandla okucindezela ngu-20-40MPA kanye no-3000-6000PSI/20 - 40 MPA/3,000 - 6,000 PSI.
I-IADC237 triocne bits izosetshenziselwa amatshe esihlabathi anemigqa ye-quartz, i-limestone eqinile noma i-chert, i-crystalline dolomite, i-hematite ores, namashali aqinile.

Ukucaciswa Komkhiqizo

Ukucaciswa Okuyisisekelo
Usayizi we-Rock Bit	12 1/4 amayintshi
Usayizi we-Rock Bit	311.2 mm
Uhlobo Lwebhithi	Ibhithi Yezinyo Zensimbi / Ibhithi Yezinyo Le-Milled Tricone
Uxhumano Lwentambo	6 5/8 API REG PIN
Ikhodi ye-IADC	IADC237G
Uhlobo Lokuthwala	Ijenali Ephethe
Ukufaka uphawu	I-elastomer evaliwe noma i-Rubber evaliwe
Ukuvikelwa Kwezithende	Iyatholakala
I-Shirttail Protection	Iyatholakala
Uhlobo Lokuzungeza	Ukuzungeza Udaka
Isimo Sokubhoboza	Ukubhola okuzungezayo, ukubhola ngezinga eliphezulu, ukubhola okujulile, ukubhola kwezimoto
Inani lamazinyo eliphelele	147
I-Gage Row Amazinyo Ukubala	40
Inombolo Yemigqa Ye-Gage	3
Inombolo Yemigqa Yangaphakathi	9
I-Angle ye-Jounal	33°
I-Offset	6.5
Amapharamitha Okusebenza
I-WOB (Weight On Bit)	35,053-83,813 lbs
I-WOB (Weight On Bit)	156-373KN
I-RPM(r/min)	300 ~ 60
I-torque ephezulu enconyiwe	37.93KN.M-43.3KN.M
Ukwakheka	Ukwakheka okuqinile okumaphakathi kuya kokuphakathi kokumelana nokuchotshozwa okuphezulu.

Ukuthola izingcezu zokumba amatshe kuyisinyathelo sokuqala sephrojekthi yokumba.
Sizokwabelana ngemininingwane mayelana nendlela yokukhetha izingcezu ze-tricone ezifanele?
A.Kunezinhlobo ezi-2 zezingcezu ze-triocne ezisuselwe ohlotsheni lwamazinyo.
1) Amabhithi ensimbi ye-ttooth trione (IADC1**,IADC2**,IADC3**)
2) I-TCI trione bits (IADC4**,IADC5**,IADC6**,IADC7**,IADC8**)
B.Kunezinhlobo ezi-4 zamabhithi e-tricone asekelwe ohlotsheni lwe-bearing.
1) Ijenali ephethe (IADC**6,IADC**7)
2) I-roller bear (IADC**4,IADC**5)
3) I-Open bear (IADC**1)
4) I-Air bear (IADC**2,IADC**3)
C Eminye imininingwane:
1) Ukwakheka okuthambile kungcono ukhethe ibhithi lensimbi ye-tricone, isb udaka.
2) Ukwakheka okuqinile kungcono ukhethe i-TCI trione bit, isb.
3) I-roller bear, ijenali isetshenziswa kakhulu ezinhlelweni zokumba imithombo yamanzi.
I-4) Ama-bearings avulekile, i-air bear, i-roller bear isetshenziswa kakhulu emisebenzini yezimayini.
5) Khetha i-tricone kancane njengamandla acindezelayo

I-PSI	Ikhodi ye-IADC	Ukwakheka
0 ~ 4000	IADC1**	ubumba namatshe esihlabathi, usawoti
4000~8000	IADC2**	i-marl limestones, i-gypsum, namalahle aqinile.
8000 ~ 15000	IADC3**	amatshe esihlabathi ane-quartz binder, amatshe esihlabathi aqinile, ama-quartz shales aqinile, i-magma, namadwala e-metamorphic.
15000 ~ 25000	IADC4**	ama-shales, ama-dolomite, amatshe esihlabathi, ubumba, usawoti, nama-limestones.
25000~40000	IADC5, IADC6	amatshe esihlabathi ane-quartz binder, ama-dolomite, ama-quartzite shales, i-magma kanye namadwala angama-coarse-grained metamorphic
Ngaphezu kuka-40000	IADC7, IADC8	i-limestones eqinile ye-silica, imigqa ye-quartzite, i-pyrite ores, i-hematite ores, i-magnetite ores, i-chromium ores, i-phosphorite ores, nama-granite